T56 throwout bearing
| BR NO | PICTURE | OEM NO | Application |
| OR3121 |  | 12561178 15740929 15740930 15742944 15018532 | Chevrolet Camaro |
T56 Hydraulic Throwout Bearing Product Details
T56 throwout bearing product overview
The T56 Hydraulic Release Bearing is a high quality clutch system component designed specifically for high performance vehicles with the T56 six-speed manual transmission. This release bearing utilizes advanced hydraulic technology to ensure smooth and responsive clutch operation while providing excellent durability and reliability. Whether it's for daily driving or track racing, the T56 hydraulic release bearing provides owners with an unrivaled shifting experience.
T56 throwout bearing key features
- High Strength Aluminum Alloy Housing: Manufactured from hard anodized aluminum alloy, which reduces weight, enhances corrosion resistance and extends service life.
- Precision Hydraulic System: Built-in efficient hydraulic oil circuit and piston design ensures linear response of the clutch pedal for smoother and more precise shifting.
- Durable seals: High-quality rubber seals are used to effectively prevent hydraulic oil leakage and keep the system clean and running efficiently.
- Stainless steel piping: The internal oil piping is made of stainless steel, which is corrosion-resistant and not easy to rust, ensuring long-term reliability.
- Quick Bleeder: Equipped with a convenient bleeder valve, it is easy to quickly discharge the air in the system during installation or maintenance, simplifying the commissioning process.
- Adaptive Compensation: The built-in spring and piston design can compensate for expansion or contraction due to temperature changes to a certain extent, maintaining a stable clutch pedal feel.
- Easy to replace: The modular design makes the release bearing easy and quick to replace without dismantling the whole gearbox, saving time and cost.
T56 throwout bearing working principle
The T56 hydraulic throwout bearing utilizes hydraulic transmission technology to release and engage the clutch. When the driver depresses the clutch pedal, the hydraulic oil in the master cylinder is compressed and transferred to the slave cylinder (i.e. release bearing) through the oil pipe. At this time, the piston in the release bearing is pushed by the hydraulic pressure, moves forward and acts on the release fork to separate the clutch disc from the flywheel, thus realizing the disengagement or engagement of the gears. When the clutch pedal is released, the spring presses the clutch back into contact and the oil from the hydraulic system returns to the master cylinder, completing a full shift cycle.
T56 throwout bearing
The T56 hydraulic release bearing is especially suitable for the following high-performance vehicles:
- Chevrolet Camaro SS/RS
- Chevrolet Corvette C6/C7
- Dodge Viper
- Ford Mustang Shelby GT350/GT500
- General Motors G8
- Pontiac GTO
- Other Models with T56 Six-Speed Manual Transmission
T56 throwout bearing installation guide
Preparation
- TOOL PREPARATION: Make sure you have the necessary tools such as socket wrenches, torque wrenches, jacks, and support stands.
- SAFETY MEASURES: Before lifting the vehicle, be sure to use a solid support stand and wear appropriate protective equipment (e.g., gloves, goggles, etc.).
- HYDRAULIC FLUID PREPARATION: Select the proper hydraulic fluid according to the manufacturer's recommendations and prepare the containers needed for emptying and filling.
T56 throwout bearing step-by-step instructions
1. Remove old release bearing:
- Loosen and remove the dust cover near the shifter.
- Loosen and remove the release bearing retaining bolts using a suitable tool.
- Carefully remove the old throwout bearing from the gearbox.
2. Install the new release bearing:
- Apply an appropriate amount of grease to the surface of the new release bearing.
- Properly align and install the release bearing into its designated location on the gearbox.
- Tighten the bolts, taking care to follow the torque values specified by the manufacturer.
3. Hydraulic system venting and filling:
- Open the bleeder valve and slowly depress the clutch pedal until all air has been expelled.
- Close the bleeder valve and gradually fill with hydraulic fluid until the proper level is reached.
- Check and adjust the free travel of the clutch pedal to ensure that it meets the manufacturer's requirements.
4. Testing and Commissioning:
- Start the engine and lightly depress the clutch pedal to check for any unusual noise or resistance.
- Perform several low-speed shift tests to confirm smooth shifting.
- Make further adjustments to the hydraulic system as needed to ensure an optimal shifting experience.
T56 throwout bearing maintenance recommendations
To ensure the long-term stable operation of the T56 hydraulic release bearing, the following maintenance measures are recommended:
- Regularly check the hydraulic fluid: Every certain mileage (usually 10,000 to 20,000 kilometers), the quality and level of the hydraulic fluid should be checked and replaced if necessary.
- Keep the system clean: avoid contamination of the hydraulic fluid, especially when adding or replacing fluid, make sure to use clean containers and tools.
- Troubleshooting in time: If you find any abnormalities (e.g. heavy clutch pedal, difficulty in shifting gears, etc.), you should investigate the causes and fix them in time to avoid amplifying the problem.
- Follow driving habits: Try to avoid frequent half linkage and long time high load driving to reduce the wear of release bearing.
Frequently Asked Questions (FAQ)
Q: What should I pay attention to during installation?
A: During installation, it is important to ensure that all fittings and seals are in good condition and that the installation instructions provided by the manufacturer are strictly followed. Using the correct tools and methods will prevent unnecessary damage and malfunction.
Q: What if I notice that the clutch pedal feels “soft” or has a long stroke?
A: This may be due to air in the hydraulic system. Please check and remove the air from the system and make sure there is sufficient hydraulic fluid and no leaks. If the problem persists, it is recommended that you seek the assistance of a professional mechanic.
Q: What is the life expectancy of the release bearing?
A: T56 hydraulic release bearings have a long design life, but it may be shortened under extreme conditions or improper use. Regular inspection and maintenance can help extend their life.
Q: Do I need special tools to install or replace the release bearing?
A: Generally, standard hand tools are sufficient for installation and replacement. However, special tools may be required for certain vehicle models. Please refer to your vehicle's service manual or consult a professional.
Conclusion
The T56 hydraulic release bearing not only enhances the handling of your vehicle, but also provides owners with more convenient and reliable maintenance options. Whether you're a racing enthusiast looking for the ultimate in performance or a regular car owner who enjoys driving, the T56 hydraulic release bearing is the ideal choice to enhance your shifting experience. We hope this article will help you better understand the features and usage of this product and add more colors to your driving journey.
If you have any questions or need further assistance, please feel free to contact our customer service team. We are committed to providing you with the highest quality products and services to ensure your driving experience is perfect.
Hydraulic Throwout Bearing Supplier
 |  |  |
 |  |  |
Complete Testing Equipment
 |  |  |
 |  |  |
