Clutch three-piece kit (including pressure plate, friction plate and release bearing) Details

Function of the release bearing three-piece kit

1. Clutch disc (friction disc)

   - Name: Clutch disc, is the core part of the clutch.

   - Function: In the process of car travelling, the main function of the clutch disc is to smoothly engage or disengage the engine power and transmission. It is located between the pressure plate and the flywheel and transmits power through friction.

2. pressure disc

   - Name: Pressure disc, the active part of the clutch.

   - Function: The pressure disc is located behind the clutch disc, and together with the flywheel, it forms a pressure and friction pair that serves to hold the clutch disc in place and transmit torque. When the clutch pedal is pressed down, the pressure disc will loosen to separate the clutch disc from the flywheel; when the clutch pedal is released, the pressure disc will press down on the clutch disc to restore power transmission.

3. Release bearing

   - Name: Release bearing, also known as guide bearing.

   - Function: The release bearing is located between the clutch and the transmission. When it is necessary to shift gears, the pressure on the release bearing is increased by manipulating the clutch pedal, which pushes the release fork and moves the inner end of the release lever upward, causing the clutch release finger to disengage from the clutch disc and realising the gear shift. The release bearing needs good lubrication to reduce wear and ensure smooth clutch operation.

 Second, the price of the release bearing three-piece kit

Price range of the release bearing three-piece kit

1. General price range: Overall, the price range for a clutch three-piece kit is roughly between RMB 300 and RMB 1,500. This price range covers the prices of most common car models and budget parts.

2. Specific prices:

   - Three-piece sets of non-original parts for budget models: the price may be around three to four hundred RMB.

   - Middle and high end models or cases where original parts are required: the price may reach more than eight hundred dollars or even more than one thousand dollars.

Separation bearing three-piece kit price influencing factors

1. Brand and model: the price of clutch three-piece set will be different for different brands and models. The price of parts for famous brands and high-end models is usually higher.

2. type of parts: the price of original parts is usually higher than non-original parts. Genuine parts tend to be more guaranteed in terms of quality, fitment and durability.

3. Region and repair shop: Labour costs and parts prices vary from region to region. Repair costs in large cities are usually higher than those in small cities or rural areas. At the same time, service costs and parts prices may also vary between repair shops (e.g. 4S shops, chain repair shops or independent repair shops).

Other costs

- Labour cost: In addition to the cost of materials, replacing the clutch 3-piece kit also needs to take into account the labour cost of professional technicians. The labour cost varies from region to region and from repair shop to repair shop, and usually ranges from several hundred dollars to thousands of dollars. Therefore, when replacing a clutch three-piece kit, the total cost may exceed the price of the part alone.

 Attachment: Common causes of damage to the clutch three-piece kit

1. Incorrect driving habits: Frequent half-linkage operation, especially keeping half-clutch state for a long time during starting and low-speed driving, will lead to overheating and wear of the clutch disc.

2. Excessive wear: With the increase of vehicle mileage, the clutch disc will gradually wear out, resulting in the reduction of friction material, which affects its grip and hence the efficiency of power transmission.

3. Insufficient lubrication of release bearing: If the release bearing lacks lubrication or has poor sealing, it will be easily damaged due to high temperature and wear, which may further affect the release function of the clutch.

4. pressure disc problem: fatigue or damage of pressure disc spring will reduce the pressure force on the clutch disc, resulting in slipping phenomenon.

5. Improper operation: such as rapid acceleration, heavy load starting, etc., will increase the load of the clutch and accelerate its wear.

6. Mechanical failure: for example, the failure of the clutch hydraulic system or mechanical linkage mechanism may lead to incomplete separation or uneven compression force.

7. Quality problems: the use of poor quality clutch components may lead to early failure.

8. Environmental factors: Driving for a long period of time under adverse conditions, such as frequent wading or extreme temperatures, may also affect the life of the clutch three-piece kit.

9. Release bearing return problem: If the release bearing return spring fails, the release bearing may continue to press on the release lever, resulting in unnecessary wear.

10. Design or Manufacturing Defects: In some cases, deficiencies in the original factory design or manufacturing defects may also cause premature damage to the clutch assembly.

Summarising

The release bearing three-piece kit is a key component in the clutch system that includes the clutch disc, pressure plate and release bearing. They work together to transfer or cut off power between the engine and the wheels. Overall, the price range for a clutch 3-piece kit is roughly between CNY300 and CNY1,500 (between $50-$300). This price range covers the prices of most common car models and budget accessories. The price of a 3-piece kit is affected by a number of factors such as make, model, type of part and labour cost. Therefore, when replacing a clutch three-piece kit, vehicle owners are advised to ask and budget for the right parts for their model on a case-by-case basis and ensure that the replacement is carried out by a professional technician. Regular inspections and proper driving habits are key to preventing these damages.