About Ford and Focus

Ford is an automaker based in Dearborn, Michigan, United States, which occupies an important position in the global automobile market with its long history, rich product line and excellent performance. The Ford Focus, as a compact sedan under the Ford brand, has won the hearts of consumers with its stylish appearance, excellent handling and good fuel economy since its introduction.

Clutch Slave Cylinder Introduction

Before discussing clutch slave cylinder replacement costs, it's critical to understand the role of the clutch system in a manual transmission vehicle. The clutch system is responsible for disconnecting and connecting the power transfer between the engine and transmission, and the clutch slave cylinder is an important component of this system that responds to the action of the clutch pedal by pushing on the clutch release bearing, which disengages the clutch and allows for a gear shift operation.

The clutch slave cylinder, also known as the clutch splitter pump, is a key component in the hydraulic clutch operating system. It receives hydraulic signals from the clutch master cylinder (master pump) and converts them into mechanical force to push the clutch release bearing, which separates the clutch pressure plate from the clutch disc, thus realizing the power cutoff between the engine and the transmission. The clutch slave cylinder plays a vital role in the shifting process.

Steps to Replace Clutch Slave Cylinder

Replacing the clutch slave cylinder in your Ford Focus usually involves following these steps:

1. Preparation: Make sure the vehicle is in a safe condition, disconnect the negative battery terminal, release the pressure in the hydraulic system, and prepare the required tools and a new clutch slave cylinder.

2. Disassemble the old parts: First, it is necessary to disassemble the oil pipe and fixing bolt connected to the clutch slave cylinder, and then carefully remove the old clutch slave cylinder from the vehicle. During the disassembly process, it may be necessary to remove other related parts first to gain better access to the clutch slave cylinder.

3. Install the new part: Install the new clutch slave cylinder into the vehicle, make sure the fixing bolts are tight and secure, and reconnect the fuel line. During installation, the oil line should be inspected for damage or deterioration and replaced if necessary.

4. Venting and testing: After the replacement is completed, the clutch hydraulic system needs to be vented to ensure that there is no air remaining in the system. Then, carry out the clutch function test to ensure that the clutch can be normally disengaged and engaged. During the test, attention should be paid to the working condition of the clutch and whether there is any abnormal sound or oil leakage.

Ford Focus Clutch Slave Cylinder Replacement Costs

The cost of replacing the clutch slave cylinder in Ford Focus varies depending on the model, region and repair store. Generally, the cost of replacing the clutch slave cylinder consists of two parts: the cost of parts and the cost of labor. The cost of parts depends mainly on the make and model of the clutch slave cylinder, while the cost of labor is related to the repair store's rates and the difficulty of replacement.

The cost of the part itself is relatively low, but the labor cost can be high because accessing the slave cylinder usually requires dismantling part of the vehicle structure, and for some models in particular, the transmission may need to be removed. If the transmission needs to be removed to replace the slave cylinder, this can be an expensive repair.

Depending on the market, the cost of a clutch slave cylinder replacement in the UK is around £53 to £124, and with labor, the total cost is between £255 and £580. In the US, some owners have mentioned that the cost of replacing the clutch slave cylinder at a dealership was around $380, while a nearby Ford dealer quoted $290, including parts and labor. In China, the cost of replacing the clutch slave cylinder is around $750 to $850, labor is between $450 and $550, and parts are around $250 to $300.

Therefore, the cost of replacing the clutch slave cylinder in Ford Focus is roughly between $290 and $580, depending on the repair store chosen and the region where it is located. Car owners are advised to consult multiple repair stores to compare quotes when they need to replace the clutch slave cylinder in order to choose the most cost-effective repair option.

To summarize, the cost of Clutch Slave Cylinder replacement for Ford Focus varies depending on the region, model year, price of the part, and whether additional parts or services (such as transmission removal) are required. To get the most accurate quote, it is recommended to contact a professional auto repair service provider directly.